Need Mobile Drone Defense? This 4-Channel System Neutralizes UAVs at 1

Need Mobile Drone Defense? This 4-Channel System Neutralizes UAVs at 100W Output!

Introduction: The Growing Threat of Rogue Drones

In today's security landscape, unauthorized drones pose unprecedented risks to military installations, airports, and critical infrastructure. From payload deliveries to surveillance breaches, these UAVs demand advanced countermeasures that combine power, precision, and portability.

The VIC-4 1000MHz–2000MHz Drone Mitigation System delivers exactly that. With 100W output power, four customizable frequency channels, and IP68-rated ruggedness, it sets a new standard for tactical counter-drone operations. This guide explores how the VIC-4 empowers security teams to neutralize drone threats within 1,500 meters while complying with RF regulations.


Technical Specifications: Engineered for Tactical Superiority

1. Unmatched Frequency Control

  • Coverage: 1000MHz–2000MHz (targets FPV video, control links, and GPS)

  • Four Independent Channels: Isolate and disrupt specific bands (e.g., 1.2GHz, 1.5GHz, 1.8GHz)

  • Adjustable Power: 10W–100W output (scalable for 100m–1,500m mitigation)

2. Rugged, Field-Ready Design

  • IP68 Waterproof: Operates in rain, snow, or sandstorms

  • Extreme Temperature Resistance: -30°C to +60°C

  • Lightweight (3.2KG): Wearable as arm-mounted, chest-hung, or waist-carried

3. Power & Endurance

  • Dual 29.2V/10,000mAh Batteries: 60+ minutes of continuous operation

  • Hot-Swappable Batteries: Extend missions without downtime


Key Benefits: Why Professionals Choose the VIC-4

1. Precision Mitigation

Unlike broad-spectrum jammers, the VIC-4 targets only drone-specific frequencies, minimizing collateral impact on:

  • Cellular networks

  • Wi-Fi

  • Emergency communications

2. Rapid Deployment

  • <5-Minute Setup: No software or calibration needed

  • LED Status Panel: Real-time feedback on power/frequency

3. Customizable for Any Scenario

  • Urban Ops: Lower power (10W–30W) for 300m–500m coverage

  • Open Terrain: Max 100W output for 1,500m range


Who Uses the VIC-4? (Target Applications)

1. Military & Defense

  • Frontline Ops: Disable hostile reconnaissance drones

  • Base Security: Create mobile "no-fly zones"

2. Critical Infrastructure

  • Airports: Prevent runway incursions

  • Power Plants: Stop sabotage attempts

3. Law Enforcement

  • Prisons: Block contraband deliveries

  • VIP Protection: Secure event perimeters


How It Works: Ethical and Focused Mitigation

The VIC-4 disrupts three critical drone systems:

  1. Control Links: Severs operator commands

  2. FPV Video: Forces automated hover/landing

  3. GPS/GLONASS: Disables navigation

Note: Always verify local RF laws before deployment.


VIC-4 vs. Traditional Solutions

Feature VIC-4 Fixed Mitigation Towers
Mobility Wearable, 3.2KG Permanent installation
Response Time Instant activation 15+ minute setup
Customization 4 adjustable channels Limited frequency presets

Compliance & Best Practices

  • Legal Disclaimer: *"The VIC-4 requires authorization in most countries. Consult local regulations."*

  • Training: Recommended for tactical teams (1-day certification available)


FAQ: Expert Answers

Q1: How quickly can frequencies be changed?

A: Instantly via the onboard control panel—no reboot needed.

Q2: What’s the operational lifespan?

A: 5+ years with proper maintenance (battery replacements every 2 years).

Q3: Does it work against DJI’s newest drones?

A: Yes, when configured for 1.2GHz/2.4GHz/5.8GHz (customizable).

Оставьте комментарий

Обратите внимание, что комментарии должны быть одобрены перед публикацией.

Что Вы ищете?

Ваша корзина